Bettinnendecke slips - remedy
The interior of your blanket (bed interior blanket) slips? Here's how to find a remedy. Something "manual" skillfully provided.
My skinny summer blanket disappears at night towards my feet. Since my feet usually glow like a blast anyway, this is a bit unfavorable when the feet are glowing, and the shoulder / neck area is just covered with the comforter cover and it pulls.
That's how I helped myself:
- Take a piece of fabric with a neutral color - e.g. white (I bought something from a well-known Swedish furniture store for little money) and cut a few strips about 8-10 cm long and about 2 cm wide.
- Fold and sew these strips, then fold them in half to form a loop. The seam can be from sewing inside. Sew this loop together in the middle. There should be enough room for the button to fit through later.
- Then sew the loop to the inside of the duvet cover on the side seam. For me, I sewed the loops about 2-3 cm from the corner.
- Sew on a button on the side next to the duvet cover. At about the height where the loops were sewn on the outer cover.
- When pulling first the buttons through the tab (no, I do not quote Mike Krüger :-D) and then, as you are used to, finish.
Now, nothing should slip. Have fun and success while debugging.
PS: Comments welcome.