Make a swing for birds
For the swing colorful beads you need a roller and some stuffing for the roller, so it does not turn when the bird sits on it and two paperclips XXL.
First, the paperclip is bent apart and straightened as much as possible. Then the beads are threaded.
The ends of the paperclip are slightly bent (about 2.5 cm), the roller is stuffed with some stuff. The ends of the paper clip are inserted into the roller.
Before that, you should squeeze the paper clip a little bit and then just pull it apart again so that the roller sits on tension. In the middle of the arch another paper clip is attached. Again, colorful beads are threaded.
At the top, the end is bent over and attached to the cage ceiling.
