Attach pushbuttons - Instructions (jacket pockets) | TheFruitAndFlowerBasket TV
Do you have a jacket that has great, big pockets but can not be closed? Do you constantly have the problem that the contents fall out when you bend over? Here is a solution.
Get sewing-free snaps for anoraks. These are available, for example, from Prym. In one side of the box you have the two tops and on the other side the two parts and the punching tools. First, sort out the following items from the pack: the riveting tools, the shim and the pin. You take the plastic holder in the hand so that the white tip points to you. First, you put the pin in the white plastic part, in such a way that the conical tip points to you. Use a pen to mark the spots you want to punch, place the tile under it, set the pin and hit it two to three times with a hammer, depending on the thickness of the fabric. The bottom you must also punch before. Then you take out the pin, take the other part of the riveting tools and put it on one side in the holder until it clicks into place. Then you take the white plastic part and put it on the other side of the plastic holder. The spring piece belongs to the upper part of the push button. Put it with the opening facing you on the tool tip until it clicks into place. The white plastic part is for the cap of the upper part. Put this cap in the white bowl. Bend the white plastic holder together, put the feather part on the inside of the hole, so that the metal part looks out a bit, puts the cap over it and strikes it from above a few times. Now the upper part should already be tight.
Buy now 
Prym 390307 Sewing-free pushbutton anorak brass 15 mm black, metal 9,15? 8,74 ?
For the lower part of the push button, you have to rebuild the tool. If you can not get the part out, try using pliers. Now you need the other two parts of the riveting tool. One part has a rubber cap, the other part has a hollow at the top. On the part with the rubber you put the bottom of the push-button with the long pin. On the other side is the other part of the lower part. This puts her with the pen down on it. However, if you want to attach the snaps to a side pocket of a jacket, the tool will not help you now. Insert the part with the long pin by hand through the punched hole, put the other part with the tool on it and hit it hard two or three times. And the push-button is ready for use and your things are safely stored in the bag.
You can subscribe to our channel at youtube.com/TheFruitAndFlowerBasketTV!
Your video here? Send us your video tip and we'll give you a 50? Amazon coupon! That's how it works!
