Hard-rusted wheels come loose without a lift in front of the door
Anyone who changes his wheels himself has probably ever experienced a wheel rusted on the hub. Without a lift, you can sweat quickly. In any case, do not apply strong blows to the wheel / wheel bearing! Better is the following (feeling and sense of responsibility provided!):
Loosen the wheel bolts when the vehicle is standing on the wheel, but ONLY ONE (and really only ONE!) Turn. Then reinsetzen, start engine, first gear in, drive a little and then brake abruptly. But really just start, not fast.
Then the same backwards. You can also help with rust remover on the NAae. As soon as it breaks when braking, stop immediately, the screws are stressed on shear and possibly destroyed from now on, the rim also. Now jack up (with jack), remove screws completely and remove wheel.
Always do only one bike at a time, even if it seems tedious. And always proceed with the utmost caution. But it works.
